Concave Surface Grating For Food & Hygienic Flooring

Concave Surface Fibreglass Grating

Floor Grating - anti slip surface to meet health & safety requirements for all industry.

 

Concave Surface Fibreglass Grating

 

The anti-slip resistant feature of Dura Tread Fibreglass grating is created during the moulding process by the formation of a concave cross-section on the walking surface. The two knife-edges produced by this process provide traction over a wide range of environmental conditions.

Concave Surface Fibreglass Grating

Anti Slip Concave Surface Floor Grating for health & safety requirements, zero maintenance.

 

Concave Non Grit Surface

 

The method of producing Fibreglass Grating creates a walking surface with an excellent anti slip finish without the application of grit particles bonded to the top surface.

Concave Surface Fibreglass Grating

GRP Anti Slip Concave Surface Grating offering one of the highest degrees of slip resistance measured for a walking surface.

 

Concave Surface For Hygienic Areas

 

Concave grating is particularly suited to low pedestrian areas and is often selected for hygienic applications and food preparation areas where gritted surfaces may cause concern.

Concave Surface Fibreglass Grating

Concave anti slip floor grating for workstations, platforms, wash bays, ramps & service duct covers.

 

Corrosion Resistant & Long Life Span

 

Concave Fibreglass Grating is used in all types of industry where corrosion resistance and long life spans are paramount. All fixings are available in 316 stainless steel to suit all applications.

Concave Surface Fibreglass Grating

Concave Surface Grating - super anti slip in wet & oily areas. Easy installation, light & strong.

 

Lightweight & Easy to Lay

 

Metal grating has been available for decades, and has been successful for a number of applications. However, over the past few years, there have been problems where metal gratings have failed due to corrosive elements, or where galvanising has been subject to damage. Metal grating is also subject to deformation due to over loading, rendering the material dangerous, and a trip hazard. Dura Tread Fibreglass Grating weighs one third of metal grating, is easier to lay, and does not require heavy lifting equipment for installing or removal for routine servicing.

Concave Surface Fibreglass Grating

GRP Anti Slip Concave Surface Grating - Highest slip resistance to suit all hygiene sensitive flooring applications.

 

Industrial GRP Grating

 

Often referred to as industrial GRP grating (glassfibre reinforced plastics) this material is generally know as the material for the construction of chemical plant and yacht construction. Industrial GRP grating is suitable for factory walkways, workstations, washbays and gully and trench gratings. The anti slip surface meets health and safety requirements for all industries. Industrial GRP grating is light, strong and can be supplied with a full range of stainless steel clips, clamps and various hold-down fixings to suit all situations.

Concave Surface Fibreglass Grating

Concave surface floor grating to meet health & safety & hygiene requirements for food & medical industries.

 

Concave Surface Grating

 

Fibreglass Grating is used in all types of industry where corrosion resistance and long life spans are paramount. Various mesh sizes, thicknesses and colour options makes Fibreglass Grating the obvious choice over steel, metal and other conventional flooring systems.

 

Applications

 

  • Flooring
  • Bridges
  • Ramps
  • Walkways
  • Platforms
  • Assembly Lines
  • Work Stations
  • Wash Bays

Benefits

 

  • Anti-Slip Surface
  • Lightweight
  • Fire Resistant
  • Corrosion Resistant
  • Non-Magnetic
  • Impact Resistant
  • Maintenance Free
  • Attractive Design

 

 

Panel Thickness & Mesh Size Information

Panel Thickness & Mesh Size Information

 

British Standard Test Results

 

The BS4592 test was devised to test and assess the slip resistance of industrial type flooring intended for use in water and wet areas. A co-efficient of friction (CoF) is calculated by determining the mean angle of inclination that an operator can safely maintain when the flooring is subjected to a continuous stream of water.

British Standard Slip Test Results

Colours

 

Standard colours are Green and Grey, other RAL colours available on request for volume orders.

 


Dark Green
RAL 6010
Light Grey
RAL 7047
Note: Due to the printing process colours shown are a guide only.

 

In addition to improving safety standards Dura Tread Fibreglass Grating provides excellent chemical resistance is easy to install and offers long term durability. The gritted anti-slip surface has one of the highest degrees of slip resistance ever measured for a walking surface. Consideration should be given to installing Safety Flooring, Slip Resistant Grating, Structural Profiles, FRP Treads, FRP Gratings, FRP Treads, Glassfibre Decking, Glassfibre Floors, Glassfibre Mesh and Plastic Gratings.

 

These products are ideally suited for Fuelling Barges, Covers, Jetties and Platform Scrubbers.