John Henry Group Appointed as our Registered National Installer
Mini Mesh Non Slip Fibreglass Floor Grating (12x12mm Mesh)
Mini Mesh Grating has one of the highest degrees of slip resistance ever measured
Dura Tread Mini Mesh Fibreglass Grating
Dura Tread Mini-Mesh Fibreglass Grating has a 12mm x 12mm open mesh area compared with standard 32mm x 32mm square mesh grating. The smaller opening prevents objects a small as 12mm from falling through, and complies with the European 15mm ball falling test requirement. Also, because of the close spacing of the bearing bars, it provides smooth movement for small wheeled trolleys, wheelchairs etc.
Anti slip surface for health and safety requirements. High Strength, Light, Various Thicknesses & Panel Sizes.
Anti-Slip Surface
Angular Quartz is integrally bonded to the top surface, which produces an extremely long-lasting hardwearing surface. This gritted anti-slip texture has one of the highest degrees of slip resistance ever measured for a walking surface.
Dura Tread Mini-Mesh has been successfully used in many industries including, Aerospace, Food Processing, Beverage, Chemical Processing, Water and Waste Treatment, Metal Finishing, Pulp and Paper Production, Transportation, Pharmaceuticals, Textiles, Oil and Gas Industries, Mining, Smelting and Refining.
Anti slip surface to meet health & safety requirements for all industries
Mesh Sizes
Smaller mesh sizes are suitable for small wheeled trolleys and wheelchairs, and prevent small objects from passing through.
Super strentgh, anti slip floor grating for gully, duct & trench covers
High Strength, Lightweight Anti Slip Decking
Dura Tread Mini-Mesh grating is lightweight, chemical-resistant, non-conductive, non-slip, impact and fire resistant, and unlike metal grating will not rust, and never needs painting. Three top surface finishes are available; gritted for maximum anti-slip properties; concave surface anti-slip and smooth for special purposes. Mini-Mesh grating is an ideal substitute or replacement for stainless steel, aluminium and galvanised steel grating.
Applications
|
Benefits
|
Panel Thickness & Mesh Size Information
British Standard Test Results
The BS4592 test was devised to test and assess the slip resistance of industrial type flooring intended for use in water and wet areas. A co-efficient of friction (CoF) is calculated by determining the mean angle of inclination that an operator can safely maintain when the flooring is subjected to a continuous stream of water.
Colours
Standard colours are Green, Grey and Sand, other RAL colours available on request for volume orders.
| Dark
Green RAL 6010 |
Light
Grey RAL 7047 |
Sand RAL 1001 |
In addition to improving safety standards Dura Tread
Fibreglass Grating provides excellent chemical resistance, is easy to
install, and offers long term durability. The gritted anti-slip surface
has one of the highest degrees of slip resistance ever measured for a
walking surface. Consideration should be given to installing Fibreglass
Reinforced Plastics Floor Grid, Fibreglass Anti Slip Grating, Glassfibre
Reinforced Plastics Gratings, GRP Floors, GRP Flooring, Reinforced Plastics
Mini Mesh, Reinforced Plastics Stairs and FRP Mini Mesh.
These products are ideally suited for Fueling Jetties, Ladders, Piers, Fueling Stations and Entrance Gangways.